Faucet Repair in Chicago, IL: Call a Local Pro

Chicago has hard water, brutal winter cold and some of the oldest housing stock in the country, from bungalows and two-flats to high-rises. Call (888) 554-0426 if a faucet in your flat, bungalow or high-rise drips, leaks or runs weak, and we will connect you with an independent contractor who works your part of the city.

Call (888) 554-0426

What is the quickest way to get faucet repair in Chicago?

Looking for faucet repair in Chicago? Call us, tell us your zip code and building type, and describe the problem. We connect you with an independent local contractor at no cost. If a pipe froze or water will not stop, shut off the main valve first and tell your landlord if you rent.

Call (888) 554-0426

What faucet problems are common in Chicago?

Chicago faucets deal with frozen supply lines in deep cold, hard-water crust that clogs aerators and stiffens handles, worn washers and cartridges, and old valves in the bungalows, two-flats and greystones that make up much of the city.

Chicago water comes from Lake Michigan and is hard, so scale builds on spouts and inside cartridges. Winters can be severe, and many buildings are a century old. Because so many people rent or live in two-flats and condos, one leak often affects more than one household.

What you see	Common cause in Chicago
White crust on the spout	Hard water minerals
No water after a deep freeze	Frozen line in an exterior wall or an unheated space
Weak flow at one tap	Scale clogging the aerator
Handle leaks at the base	Worn O-ring or packing
Stain on the ceiling below	Leak at a fixture in the unit above

Older Chicago buildings can have old valves, old supply lines and shared risers. The sink valve may be the only one you can reach. A pro can tell you what can be fixed at the faucet and what needs the building owner.

How does Chicago's water affect faucets?

Utility data puts Chicago water in the hard range. Minerals leave crust on spouts and clog the screen at the faucet tip. Clean aerators every few months, replace worn parts early and protect pipes from freezing, which is the bigger risk in winter.

Hard water poses no health risk but it adds wear to cartridges and seals. A vinegar soak helps an aerator. In older buildings, old pipes can also shed rust or sediment, so brown water at several taps points to the building and not just the faucet.

How does Chicago's weather affect faucets?

Chicago has cold, windy winters with deep freezes, including the occasional polar-vortex stretch. Pipes in exterior walls, unheated porches, garages and top floors can freeze and burst. Keep heat on, open cabinet doors on cold nights and know where your main shut-off is.

A frozen pipe may only leak when it thaws, so check for wet drywall after a deep freeze. Summers are hot and humid, which can hide slow leaks. Do not use a torch or flame to thaw it. See our emergency faucet repair guide for steps.

Which parts of Chicago do we help?

We help homeowners and renters across Chicago, from lakefront high-rises to neighborhood bungalows. Areas we can often help include Lincoln Park, Logan Square, Bridgeport, Lakeview, Pilsen and Beverly. Tell us your zip code and building type on the call and we will find a pro near you.

Lincoln Park: Older townhomes and condos with mixed-age plumbing.
Logan Square: Two-flats and greystones where original valves are common.
Bridgeport: Older bungalows and two-flats with aging lines.
Lakeview: Mid-rise condos and older flats with shared plumbing.
Pilsen: Older brick two- and three-flats with original pipes.
Beverly: Larger older homes with many fixtures and basements.

Call (888) 554-0426

What faucet repair services can we connect you with in Chicago?

We can connect you with an independent local contractor in Chicago for any of these faucet problems. Pick the page that matches what you see, read the signs and causes, and then call. If you are not sure what is wrong, call and describe it.

What should I do first if a faucet leaks in Chicago?

If a faucet is leaking in Chicago, shut off the valves under the sink right away, turning each one clockwise. If there are no valves, or they will not turn, shut off the main water valve. Then call a pro, and use towels to protect the floor and cabinets.

Turn the sink valves clockwise until they stop.
Use the main valve if the sink valves fail.
Move rugs and items away from the water.
Soak up water so it does not reach cabinets and floors.
Take a photo of the leak for the contractor and your records.

In a two-flat or condo, a leak can reach the unit below in minutes. Close the sink valves, tell your landlord or board and your downstairs neighbor right away, and take photos. After a deep freeze, check for frozen lines before running water.

More steps: emergency faucet repair guide.

How much does faucet repair cost in Chicago?

A pro repair for a leaky faucet in Chicago typically costs about $150 to $350. That is a typical range, and it varies by area and job. Parts are often low cost, while labor, access and the faucet type drive most of the price. Ask for the full price before work starts.

Faucet type and age: older or rare faucets can need special parts.
The part: a washer or O-ring costs less than a cartridge or a whole faucet.
Access: tight or hidden plumbing takes more time.
Timing: nights and weekends can cost more.

Building rules, parking permits and old valves can add time and cost in the city. Ask what the quote covers, and compare repair to replacement for older faucets.

How do I choose a faucet repair contractor in Chicago?

To choose a faucet repair contractor in Chicago, ask for a license number and proof of insurance, then check them yourself. Get the full price in writing before work starts, and ask what the warranty covers. The homeowner is responsible for confirming license and insurance.

Ask for a written price with parts, labor and any fees.
Ask for the license number and proof of insurance.
Ask what the warranty covers on parts and on labor.
Ask how long the job should take.
Check the license with the state or local office.

Ask if the contractor works in two-flats and condos and can send proof of insurance to your board. Get the price and warranty in writing, and check the license yourself.

What other places near Chicago do we help?

We also help homeowners in cities around Chicago. If you live in one of these areas, call and give us your zip code. Coverage can vary by location and by time of day, so we will tell you what is available when you call.

All Illinois cities

We also help homeowners in Cicero, Evanston, Oak Park and Skokie. We do not have local pages for these cities yet, but you can still call. Chicago is the center of a very large metro. Give us your zip code and we will check what is available near you.

Faucet repair in Chicago: your questions, answered

Is Chicago water hard?

Utility data puts Chicago water in the hard range. Minerals crust spouts and clog aerators. Regular cleaning helps.

What should I do if my pipes freeze in Chicago?

Shut off the main valve, open the faucet and call a pro. Do not use a torch or open flame. A frozen pipe may have cracked, so look for wet walls and ceilings as it thaws.

Who fixes my faucet in a Chicago two-flat?

It depends on your lease or building rules. Tell your landlord first and ask who should hire and pay for the repair.

Why is my water brown at first?

Old pipes or valves can shed rust, especially after the water has been off. Let it run a short time. If it keeps happening at several taps, tell your landlord.

How do I keep pipes from freezing in an older building?

Keep heat on, insulate exposed pipes, open cabinet doors on exterior walls and let a faucet drip in a deep freeze.

How long does faucet repair take in Chicago?

Many repairs take about an hour or two. Building access or old valves can add time. Ask for a window and a written price.

Faucet trouble in Chicago?

Call now and get connected with a local faucet repair pro. Free for Chicago homeowners.

Call (888) 554-0426