Faucet Repair: Find the Fix With a Local Pro
Most faucet problems come from one worn part inside the faucet. A local pro can find it and replace it, often in one visit. Call (888) 554-0426, tell us what the faucet is doing, and we connect you with an independent contractor near you.
What kinds of faucet problems can a pro repair?
A pro can repair drips, leaks at the base or handle, stiff or loose handles, weak flow, noisy pipes and sprayers that no longer work. Most come from a worn washer, O-ring, seat or cartridge, or from mineral buildup. The right fix depends on the faucet type and the part.
| What you see | Common cause | Learn more |
|---|---|---|
| Drip from the spout | Worn washer, seat or cartridge | Leaky faucet repair |
| Weak or uneven flow | Clogged aerator or worn cartridge | Low water pressure |
| Stiff or loose handle | Worn stem or cartridge | Cartridge replacement |
| Sprayer or pull-down problems | Worn hose, diverter or seals | Kitchen faucet repair |
| Water will not shut off | Failed valve or cartridge | Emergency repair |
Which parts do pros replace most often?
Pros most often replace cartridges, O-rings, washers, valve seats and aerators. Ceramic disc faucets may need a new disc cartridge. Compression faucets need washers and seats. Each repair starts with finding the faucet type, so the right part can be matched.
- Cartridges: control flow and temperature in many single-handle faucets.
- O-rings and seals: stop leaks at the spout base and handle.
- Washers and seats: stop drips in compression faucets.
- Ceramic discs: seal the flow in disc cartridge faucets.
- Aerators: mix air into the stream and can clog with mineral buildup.
What does a pro do on a faucet repair visit?
A pro shuts off the water, finds out what type of faucet you have and takes it apart. They check each part, replace the worn ones, clean off buildup, then put it back together and test it. Many repairs are finished in one visit if the part is on hand.
- Shut off the water at the valves under the sink or at the main valve.
- Identify the faucet type: compression, cartridge, ball or ceramic disk.
- Take the faucet apart and check the parts that wear out.
- Replace the worn parts and clean the valve area.
- Reassemble and test hot and cold, then check under the sink.
How much does faucet repair cost?
A pro repair for a faucet typically costs about $150 to $350. That is a typical range, and it varies by area and job. Parts are often low cost. Labor, access and the faucet type drive most of the price. Ask for the full price before work starts.
What affects the price?
- The part: a washer or O-ring costs less than a cartridge or a valve.
- The faucet: older or rare faucets can need special parts.
- Access: tight spaces and hidden valves take more time.
- When you call: nights and weekends can cost more.
If a repair comes close to the price of a new faucet, ask your pro to price both. Read more about faucet replacement.
Should I repair or replace my faucet?
Repair a faucet that is fairly new and has parts that are easy to find. Replace it if it is old, worn or corroded, if parts are hard to get, or if it keeps leaking after repairs. A pro can price both options so you can compare.
Repair makes sense when
- The faucet is fairly new.
- The finish and body are in good shape.
- Parts are easy to find.
- The problem is one worn part.
Replace makes sense when
- The faucet is old or corroded.
- Parts are hard to find.
- It has been repaired more than once.
- You want a new style or feature.
How do I pick a pro for a faucet repair?
Ask what the price includes, if they carry common parts and what the warranty covers. Ask for their license number and proof of insurance and check them yourself. You are responsible for confirming the license and insurance required for the work.
- Describe the problem, the faucet location and any water damage.
- Ask if the price includes parts, labor and any service fee.
- Ask how long the repair should take and when they can arrive.
- Ask what the warranty covers and for how long.
- Ask for a license number and proof of insurance, then check them.
What other faucet repair services can we connect you with?
Faucet problems often come in pairs. These pages cover related repairs.
Faucet Repair questions, answered
How long does a faucet repair take?
Many simple faucet repairs take about an hour or less once the pro has the right part. Older faucets, stuck valves or parts that must be ordered can take longer. Ask your contractor for a time window before they start.
Why is my faucet hard to turn?
A stiff handle often means a worn stem or cartridge, or mineral buildup around the handle. A pro can clean or replace the part. Our cartridge replacement page covers this fix.
What can I check before I call?
Shut off the water to the faucet, put a towel or bucket under any leak and take a photo of the faucet. Note the brand and where the water is coming from. That helps the pro bring the right part.
Can I repair a faucet myself?
Often yes, for a simple drip, if you can shut off the water and match the right part. Call a pro if the faucet is old, the shut-off valves are stuck or you are not sure which part failed.
Do pros repair all faucet brands?
Many pros work on most common brands, but parts vary. Tell us the brand if you know it, and ask the contractor if they can get parts for it.
Does Faucet Fix Pros do the repairs?
No. We are a free referral service. We connect you with independent local contractors. You agree on the price and timing with the contractor and pay the contractor directly.
Ready to get that faucet fixed?
Call now and get connected with a local faucet repair pro. Free for homeowners.