Call now(888) 554-0426

Faucet Repair in Houston, TX: Call a Local Pro

Houston faucets work hard in a hot, humid climate with moderately hard water. If yours drips, leaks or will not shut off, call (888) 554-0426 and we connect you with an independent contractor who serves your part of Houston.

Call (888) 554-0426

What is the quickest way to get faucet repair in Houston?

The quickest way to get faucet repair in Houston is to call us. Tell us your zip code, which faucet it is, and what it is doing. We connect you with an independent local contractor. If water will not stop, shut off the valves under the sink first, then call.

Call (888) 554-0426

What faucet problems are common in Houston?

The most common faucet problems in Houston are drips from worn cartridges or washers, mineral crust on spouts and aerators, slow leaks hidden under sinks in humid cabinets, and hard-working outdoor spigots. Heat, humidity and moderately hard water all speed up wear.

Houston is warm and wet for most of the year. Water that leaks under a sink does not dry out fast, so a small leak can sit unseen and soften the cabinet floor. Faucets in older homes near the center of the city and in newer homes on the edges wear out in different ways, but the signs look the same.

What you seeCommon cause in Houston
Drip from the spout when the faucet is offWorn cartridge or washer, often helped along by mineral buildup
White or green crust on the spoutModerately hard water leaving minerals as it dries
Damp, soft or musty cabinet under the sinkA slow leak at a supply line or shut-off valve that stayed hidden in humid air
Weak flow from one faucetA clogged aerator or a worn cartridge
Outdoor spigot drips or leaks behind the handleWorn washer or loose packing after a long watering season

Houston homes vary a lot. Many older houses in central neighborhoods have faucets and valves that are decades old. Newer homes in the suburbs often have builder-grade faucets that wear out sooner than owners expect. A local contractor can look at yours and tell you whether a repair or a new faucet makes more sense.

How does Houston's water affect faucets?

Utility data puts Houston water in the moderately hard range. That means minerals can build up inside faucets over time. You may see crust on the spout, weak flow from a clogged aerator, or handles that feel stiff. Cleaning the aerator and replacing worn parts early keeps small problems small.

Moderately hard water is not the worst in Texas, but it still leaves its mark. Every time water dries on a spout, it leaves a little mineral behind. Over months, that crust can block the small screen at the tip of the faucet and slow the flow. Inside the faucet, minerals can scratch seals and make cartridges wear faster. If you see crust, soak the aerator in vinegar and check the flow. If the faucet still drips or feels rough, a pro can replace the worn part.

How does Houston's weather affect faucets?

Houston is hot and humid for much of the year, and hard freezes are rare. Heat and humidity speed up wear and hide leaks, and the long warm season keeps outdoor faucets busy. When a freeze does hit, unprotected spigots and exposed pipes can crack.

Winter Storm Uri in February 2021 reminded Texans that a freeze can burst pipes even in the south. Because freezes are rare, many Houston homes have little pipe insulation. Before a freeze, take hoses off, cover outdoor spigots and know where your main shut-off is. After one, watch for leaks as pipes thaw, since cracked pipes may only leak once the ice melts. See our outdoor faucet repair guide for more.

Which parts of Houston do we help?

We help homeowners across Houston, from older central neighborhoods to the suburbs. Areas we can often help include the Heights, Montrose, Midtown, Memorial, Bellaire, Spring Branch, Clear Lake and Kingwood. Call with your zip code and we will connect you with a contractor who serves your area.

  • The Heights: Many homes here are older, so original faucets and valves may be near the end of their life.
  • Montrose: A mix of older houses, townhomes and apartments. Ask early about building shut-offs in multi-unit buildings.
  • Midtown: Condos and apartments are common, and the shut-off for your unit may be shared.
  • Memorial: Larger homes often have several bathrooms and a lot of faucets to check.
  • Bellaire: Older and rebuilt homes sit side by side, so faucet age can vary from house to house.
  • Spring Branch: Established neighborhoods where aging faucets and outdoor spigots are common.
  • Clear Lake: Close to the coast, where humidity can speed up corrosion on outdoor fixtures.
  • Kingwood: Family neighborhoods with busy outdoor spigots and plenty of bathrooms.

Call (888) 554-0426

What faucet repair services can we connect you with in Houston?

We can connect you with an independent local contractor in Houston for any of these faucet problems. Pick the page that matches what you see, read the signs and causes, and then call. If you are not sure what is wrong, call and describe it.

What should I do first if a faucet leaks in Houston?

If a faucet is leaking in Houston, shut off the valves under the sink right away, turning each one clockwise. If there are no valves, or they will not turn, shut off the main water valve. Then call a pro, and use towels to protect the floor and cabinets.

  • Turn the sink valves clockwise until they stop.
  • Use the main valve if the sink valves fail.
  • Move rugs and items away from the water.
  • Soak up water so it does not reach cabinets and floors.
  • Take a photo of the leak for the contractor and your records.

Some Houston homes only have a valve at the meter box by the street, and that valve may need a special tool to turn. Find out now whether your home has an inside valve too. In a condo or apartment, ask building management where the unit shut-off is.

More steps: emergency faucet repair guide.

How much does faucet repair cost in Houston?

A pro repair for a leaky faucet in Houston typically costs about $150 to $350. That is a typical range, and it varies by area and job. Parts are often low cost, while labor, access and the faucet type drive most of the price. Ask for the full price before work starts.

  • Faucet type and age: older or rare faucets can need special parts.
  • The part: a washer or O-ring costs less than a cartridge or a whole faucet.
  • Access: tight or hidden plumbing takes more time.
  • Timing: nights and weekends can cost more.

Houston is spread out, so distance and traffic can affect trip fees from one part of the city to another. Ask each contractor what the service call fee covers and whether it is applied to the repair.

How do I choose a faucet repair contractor in Houston?

To choose a faucet repair contractor in Houston, ask for a license number and proof of insurance, then check them yourself. Get the full price in writing before work starts, and ask what the warranty covers. The homeowner is responsible for confirming license and insurance.

  • Ask for a written price with parts, labor and any fees.
  • Ask for the license number and proof of insurance.
  • Ask what the warranty covers on parts and on labor.
  • Ask how long the job should take.
  • Check the license with the state or local office.

Houston has many plumbing companies and a lot of ads, so take a moment to compare. Get the price in writing, ask about the warranty, and check the license before work starts.

What other places near Houston do we help?

We also help homeowners in cities around Houston. If you live in one of these areas, call and give us your zip code. Coverage can vary by location and by time of day, so we will tell you what is available when you call.

We also help homeowners in Pasadena, Sugar Land, Katy, Pearland and Baytown. We do not have local pages for these cities yet, but you can still call.

Faucet repair in Houston: your questions, answered

Does hard water in Houston damage faucets?

Houston water is moderately hard by utility data. Over time, minerals can clog aerators and wear seals, which leads to weak flow and drips. Cleaning aerators and replacing worn parts early helps. A pro can tell you if buildup is the cause.

Why is my outdoor faucet in Houston dripping?

Outdoor faucets work hard through the long warm season. A worn washer or a loose packing nut is a common cause. A freeze can also crack a spigot. A pro can replace the washer, repair the faucet or replace the spigot.

Can a hidden faucet leak cause mold in Houston?

It can. Humid air keeps a damp cabinet from drying out, so a slow leak under a sink can lead to soft wood and mold over time. If you smell mustiness or see stains, shut off the valves under the sink and call a pro.

Who handles shut-offs in a Houston condo or apartment?

It depends on the building. Some units have their own shut-off, and some share one with the building. Ask your property manager or HOA where it is, and ask what repair rules apply before you hire a contractor.

How fast can a pro come in Houston?

It depends on your part of the city, the time of day and the contractor’s schedule. Houston is spread out, so travel time matters. Tell us it is urgent when you call, and shut off the water while you wait.

Should I repair or replace an older faucet in Houston?

Repair a faucet that is in good shape with one worn part. Replace it if it is very old, corroded or leaks again after repairs. Ask your pro to price both so you can compare.

Faucet trouble in Houston?

Call now and get connected with a local faucet repair pro. Free for Houston homeowners.

Call (888) 554-0426

Call (888) 554-0426